standarddiesbttn bushingcompetitiondiesbttn

Online Catalog

Rifle & Handgun Die Sets

The quality and accuracy of your reloaded ammunition depends largely on the quality of the equipment you use to assemble it.

Your choice of reloading dies should not be a casual one. Your dies literally shape the quality and function of your reloads. Because they are so important, we give them a lot of attention.

  • We use the finest alloy steels obtainable.
  • Our dies are machined on Hardinge Super- Precision® lathes capable of holding the tightest tolerances in the industry.
  • This allows us to guarantee that they will produce ammunition that will p roperly fit any standard (SAAMI) chamber, re g a rdless of action type.
  • To maintain tolerances and guarantee that your dies will last a lifetime, all Redding dies are heat treated in atmospherically controlled furnaces.
  • Finally, your dies are hand polished for smooth, flawless functioning, go through final inspection, and are ultrasonically cleaned and packaged.
  • The die box is a handy cartridge loading block and storage package. Inside is a spare decapping pin, hex wrench, and even a place for your shellholder!
  • All Redding dies use the industry standard 7/8-14 threaded bodies.
You will find many products and design features here that are uniquely Redding. Most of these products have evolved from listening to the needs and desires of our customers and helping them solve specific problems.

The design of our Profile Crimp Die is an example that came about from an attempt to help silhouette shooters solve the typical “half moon” crimp so prevalent with magnum handgun cartridges. Our solution to the problem not only solved the ugly, half crimp, but proved to tighten groups as well.

Seating Dies With Taper Crimp
Reloading dies for handgun calibers that headspace on the case mouth are indicated with a reddiamond . The seating dies in these calibers are made with a taper crimp. All other calibers have the standard roll crimp. Recent tests have shown that seating the bullet to its proper depth and crimping as a separate operation will produce the best accuracy. See page 13 for additional information on crimp dies.

bottleneckFull Length Die Sets
For Bottleneck Cases
Full length die sets for bottleneck
cases contain two dies. The full
length (FL) resizing die contains a
decapping rod assembly with a
neck expander (size button). The
seating die (ST) includes bullet
guide, built-in crimp ring and the
p roper seating plug.




Neck Die Sets For
Bottleneck Cases

necksetsbottleneckNeck die sets for bottleneck
cases contain two dies. The neck
( NK) resizing die contains a
decapping rod assembly with a
neck expander (size button). The
seating die (ST) includes bullet
guide, built in crimp ring and
the proper seating plug.







Deluxe Die Sets For Bottleneck Cases
Deluxe die sets for bottleneck cases contain three dies. They
a re a special packaging of our full length die sets (described
above) with the addition of a neck (NK) sizing die.

deluxebottleneck


Die Sets For Straight Wall Cases

Die sets for straight wall cases contain three dies. This is necessary
because it is not possible to full length resize straight wall
cases and expand the neck for proper bullet fit in one operation.
straightwallThe full length (FL)
resizing die contains
a decapping
rod assembly. The
expander die (EXP)
contains a neck
expanding plug.
The seating die (ST)
includes bullet
guide, built-in
crimp ring and
the proper
seating plug.

made-in-usa
cancer hats
Join NRA