|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Model 1400-XT Case Trimming Lathe
Redding "case trimming lathes" are the only case trimmers on the market that turn the case and not the cutter. This feature guarantees a perfectly square case mouth with every cut.
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
- The Model #1400-XT Case Trimming Lathe uses a cast iron frame that has been extended to handle all the latest long action cartridges. The frame is cast iron because it is a perfect bearing surface, will not wear out and will maintain its precision and alignment for years of service.
This case trimmer was designed using precision lathe principles. The TiN coated cutter is held stationary while the case is turned; this produces cases that are perfectly square, resulting in increased accuracy from your handloads.
The Model #1400-XT Case Trimming Lathe is supplied with the following:
• Universal collet (no others to buy)
• Replaceable Titanium Nitride (TiN) coated cutter
• Six pilots - .22 cal., 6mm, .25 cal., .270 cal., 7mm and .30 cal.
• Two neck cleaning brushes (.22 thru .30 cal.)
• Large and small primer pocket cleaners.
ITEM NO. 14000 . . . . $ 120.00
Model 1400-XT features:
• Cast iron frame to last a lifetime.
• Universal collet fits all popular cases – no others to buy.
• Handles 3" case length with ease.
• New replaceable cutter with TiN (Titanium Nitride) surface treatment.
• Coarse and fine adjustments for case length.
• Storage holes for pilots.
|
|
|
|
|
|
 |
 |
 |
|
 |
|
|
|
3/16” Shank Pilots may also be used on Hornady and Forster trimmers.
|
|
Universal Collet accepts all popular cases – no others to buy!
|
|
|
New replaceable )TiN) Titanium Nitride Coated high speed cutters.
|
|
Optional Power Adapter with 1/4” hex for use with cordless screwdrivers.
ITEM NO. 14025 . . $13.50
|
|
|
|
|
|
|
|
|
| ITEM NO. 14040 |
TiN Cutter (17 & 20 caliber)* |
$ 25.80
|
| ITEM NO. 14045 |
TiN Cutter & Shaft Complete |
33.00
|
| ITEM NO. 14050 |
TiN Cutter (Standard) |
25.80
|
| ITEM NO. 15XXX |
Pilots |
5.10
|
| ITEM NO. 99301 |
Special Collet for 470 Nitro |
18.00
|
|
|
|
|
|
|
|
|
|
Item number 14045 assembly fits only Model 14 & 1400 Trimmers.
Refer to die reference chart for other pilot sizes.
* Note: Our 17 and 20 caliber pilots have a 5/32” shank, therefore, our #14040 cutter will interchange with RCBS.
|
|
|
|
|
|
|
|
BACK TO HOME PAGE | BACK TO ONLINE CATALOG
|
|
|
|
|
|
|
|
|
|
©2008 Redding Reloading Equipment. All Rights Reserved.
1089 Starr Road, Cortland, NY 13045 • Phone (607) 753-3331 • FAX (607) 756-8445
|
|
|
|
|