|
|||||||
| Redding Neck Sizing Bushings are available in two styles. Both share the same external dimensions (1/2" O.D. x 3/8" long) and freely interchange in all Redding Bushing style Neck Sizing Dies. They are available in .001" size increments throughout the range of .185" thru .368", covering all calibers from .17 to .338 and clearly marked with a size I.D. By selecting the correct bushing, you are now able to provide just the right amount of neck tension to properly hold the bullet without excessive resizing. Item No. 73185 thru 73368 (specify size) . . . . . . . . . . . . . . $16.80 Heat treated steel. The sizing diameters are hand-polished with a surface hardness of Rc 60-62 to reduce sizing effort . Item No. 76185 thru 76365 (specify size) . . . . . . . . . . . . . . $29.70 Heat treated steel as above but with the addition of a Titanium Nitride surface treatment to further increase the effective surface hardness andreduce sizing friction. Item No. 76999 . . . . . . . . . . . . $3.00 Handy bushing storage box is available separately. |
|||||||
 |
|||||||
|
TO DETERMINE BUSHING SIZE
The proper bushing size can be easily determined by measuring the outside neck diameter of your loaded cartridges with a precision micrometer. Then, simply subtract .001" from the cartridge that had the smallest average neck diameter. See "Tech Line & Tips" for complete explanation. Moly coated bullets may require tighter necks and the use of bushings .001” or .002” smaller. To determine bushing range for standard calibers see "Bushing Range Chart" |
|||||||
|
|
|||||||
|
1089 Starr Road, Cortland, NY 13045 • Phone (607) 753-3331 • FAX (607) 756-8445 |
|||||||