Handgun Die Sets
In Titanium Carbide
Titanium carbide differs considerably from tungsten carbides, and is one of the most ideal materials for resizing cartridge cases. The difference is in the microscopic structure. Tungsten carbide if viewed under a microscope, appears as sharp irregular micrograins resembling chunks of coal or quartz, and regardless of how well the surface is finished, its inherent structure remains the same. Titanium carbide micrograins on the other hand, appear smooth and rounded, resembling the rounded stones you might find in a stream bed.
Titanium carbide has the highest hardness of any readily available carbide, and those smooth rounded micrograins present a slippery, non-galling surface that is simply unattainable with other carbides.
TIC Die Sets . . . $99.00
(9MM Luger and 500 S&W add $ 16.50)
TIC Sizer Die . . . 73.50
(9MM Luger and 500 S&W add $ 16.50)

Titanium Carbide Die Sets
.
.Titanium.
.Titanium.
 . .
..Taper..
..Profile..
 . .
..Caliber..
Carbide
Carbide
.Pro-Series.
.Pro-Series.
Crimp
Crimp
Extended
.Trim.
...
Die Set
Sizer Die
Die Set
.Seat Die
Die
Die
.Shellholder.
Die
32 ACP
88220
87220
89220
94220
85220
N/A
22E
N/A
32 Smith & Wesson Long
88158
87162
N.A.
N.A.
85158
86158
10E
83158
32 H&H Magnum
88261
87162
N.A.
94261
N.A.
86261
10E
83161
32 S&W Long/32 H&R Mag
88162
87162
89162
94162
85162
86162
10E
N.A.
380 Auto
88170
87170
89170
94170
85170
N.A.
10E
83170
9MM Luger
88172
87172
89172
94172
85172
N/A.
13E
83172
38 Special
88183
87282
N.A.
N.A.
N.A.
N.A.
12E
83183
357 Magnum
88182
87282
N.A.
N.A.
N.A.
86182
12E
83182
38 Spec/357 Mag
88282
87282
89282
94282
85282
86282
12E
N.A.
38 Super Auto
88271
87271
89271
94271
85271
N.A.
5E
83271
40 Smith & Wesson
88272
87253
89272
94272
85272
N.A.
5E
83272
10MM Auto
88520
87253
89520
94520
85520
N.A.
5E
83520
40 S&W/10MM Auto
88253
87253
89253
94253
85253
N.A.
5E
N.A.
41 Magnum
88185
87185
89185
94185
85185
86158
21E
83185
44 Special
88187
87286
N.A.
N.A.
N.A.
N.A.
19E
83187
44 Magnum
88186
87286
N.A.
N.A.
N.A.
86186
19E
83186
44 Spec/44 Mag
88286
87286
89286
94286
85286
86286
19E
N.A.
45 GAP
88305
87189
89305
94305
85305
N.A.
1E
N.A.
45 ACP
88189
87189
89189
94189
85189
N.A.
1E
83189
45 Auto Rim
88189
87189
89190
94189
85189
86189
17E
83189
45 Colt/454 Casull
88191
87191
89191
94191
85191
86191
23E
 83191
460 Smith & Wesson
88278
87191
89278
94278
N.A.
86278
23E
N.A.
500 Smith & Wesson
88291
87291
89291
94291
N.A.
86291
N.A.
N.A.


Pro Series Die Sets
In Titanium Carbide

 The “Pro Series” is a specially prepared three (3) die set for use in progressive reloading machines. Since the most popular machines do not make use of an expander die, it has been eliminated in the new “Pro Series” sets. The sizing die is the extraordinary Redding Titanium Carbide, complete with a decapping unit. A superior crimp can be accomplished if it is done in a separate operation from the bullet seating. For this reason the “Pro Series” bullet seating die is designed for bullet seating only, with no crimping feature. Our Profile Crimp die is supplied for the final crimping. For cartridges that headspace on the case mouth, a Taper Crimp die is substituted. All dies in the set have a special large radius at the mouth for easy case entry, a necessary feature for progressive machines. Refer to the die chart below for ordering numbers . . . $117.00
(9MM Luger . . . add $ 16.50)
(TIC)
(PRO ST)
 (CR)
BACK TO HOME PAGE | BACK TO ONLINE CATALOG
 ©2008 Redding Reloading Equipment. All Rights Reserved.

1089 Starr Road, Cortland, NY 13045 • Phone (607) 753-3331 • FAX (607) 756-8445